EVA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: EVA 4400 Disk Enclosures

 
jon_yo
Visitor

Re: EVA 4400 Disk Enclosures

Hi:

 

     I want to change the enclosure ID, can you send me the internal paper? or reset the enclosure(factory default)  thanks.

 

 

P.S. This thread has been moved from Disk Array to Storage Area Networks (SAN) (Enterprise). - Hp Forum Moderator

2 REPLIES 2
Zsal
Valued Contributor

Re: EVA 4400 Disk Enclosures

The enclosure shelf numbering is received by the I /O module from the array controller. There is no supported way at this time to manually enter in the shelf number, or change the shelf number.

 

The shelf number is received on boot up. This is then written to the midplane EEPROM. This will then remain the same on each boot unless instructed by the array controllers to change the shelf number. The shelf number is displayed on both I /O modules.

 

You can power on/reboot the controllers so that the controllers will assign the correct IDs to the enclosures.

 

Hope this helps!!

 

Regards

Zsal

Highlighted
Torsten.
Acclaimed Contributor

Re: EVA 4400 Disk Enclosures

Power on/off or something like this will change nothing.

 

However, what should be the benefit in doing this re-numbering???


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!