HPE EVA Storage
1748063 Members
5450 Online
108758 Solutions
New Discussion юеВ

Re: Remove automatically snapshot EVA5000

 
SOLVED
Go to solution
Le Huy Hoang
Advisor

Remove automatically snapshot EVA5000

Hi HP guru,
I have an issue with my SAN system. Some of my VDisks have snapshot, which is automatically generated. And those snapshots take significantly my storage space.
And now I want to delete permanently those snapshots. I tried with both Command View EVA5000 and SSSU command but after I deleted, the snapshot automatically appeared again.
Plz help me to delete it permanently
5 REPLIES 5
P Muralidhar Kini
Honored Contributor
Solution

Re: Remove automatically snapshot EVA5000

Hi Le,

Check the attachment -
* HP StorageWorks Storage System Scripting Utility reference

Refer the section
* ADD SNAPSHOT -> Adding a snapshot
* DELETE VIDSK -> for deleting a snapshot.

Check if you followed the steps mentioned in the document.

Hope this helps.

Regards,
Murali
Let There Be Rock - AC/DC
Le Huy Hoang
Advisor

Re: Remove automatically snapshot EVA5000

Thanks for your guide.
I tried with delete vdisk command but after deletion, the snapshot automatic initiated again.
I want to delete it permanently
susanta_dutta
Trusted Contributor

Re: Remove automatically snapshot EVA5000

Hi Le,

Looks like, there must be some management operation scheduled to create snapshot again, are you running any RSM job, stop it or modify it. You may also look at the latest Trace log to see who is initiating this task Typical Location for this Log is C:\Program Files\Hewlett-Packard\Sanworks\Element Manager for StorageWorks HSV\trace. In worse case, immediately after deletion, you may stop the Command View Service in order to prevent any further management operation on to the Array, untill you find who is doing it.

Regards
Susanta
Le Huy Hoang
Advisor

Re: Remove automatically snapshot EVA5000

Hi Susanta,
No one can access to EVA5000 management except me. So that I think there is some process or automatic task has generated snapshots.
But I can not find out what it is. Can you tell more detail and clear about the log. I don't find the folder as you mention.
P Muralidhar Kini
Honored Contributor

Re: Remove automatically snapshot EVA5000

Hi Le,

Check if your problem is similar to the one discussed in the following thread -
http://run.tournament.org.il/hp-eva-bug-snapshot-removed-through-sssu-is-still-there/


In your first post, you have mentioned that -
>> Some of my VDisks have snapshot, which is automatically generated.
This means that you already have a automated task/process that creates the
snapshot at a regular basis. If Yes, then it may be possible that, the
automated task/process is automatically creating the snapshot, in case a
snapshot is deleted.

You may want to look at current configuration to find out, how the Vdisk
snapshot are currently getting automatically created and then check if it
has a logic to automatically create a snapshot, in case a snapshot is deleted.

Hope this helps.

Regards,
Murali
Let There Be Rock - AC/DC