HPE EVA Storage
1751695 Members
5225 Online
108781 Solutions
New Discussion юеВ

Re: Update Eva firmware

 
SOLVED
Go to solution
Xachik
Occasional Advisor

Update Eva firmware

I have Eva 4400 with XCS09004000 and CV8.0
I want update firmware to XCS09522000
Before update firmware i must update firmware on the management module and CV to 9.1 version
where i can download management module firmware and CV 9.1
on hp web site when i click download only trial version CV and ABM package

 

 

P.S. This thread has been moevd from Storage > Planning to Storage Area Networks (SAN) (Enterprise). - Hp forum moderator

12 REPLIES 12
Torsten.
Acclaimed Contributor

Re: Update Eva firmware

Firmware:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T4256-63129


Command view 9.2:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=CommandViewEVA9.2


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Xachik
Occasional Advisor

Re: Update Eva firmware

Dear Torsten.
When I press your link and opened
On a website under the instruction it is written

"Download Command View EVA to try the software. All features are functional for evaluation purposes only and cannot be used in a production EVA environment. Features will function for 60 days. Once you have experienced the demonstration you can activate HP Command View EVA in a production environment by ordering the appropriate Media Kit and software licenses"

Are you sure,what is it is not the trial version
Torsten.
Acclaimed Contributor

Re: Update Eva firmware

Once the licenses are applied this should be fully functional. The "trial" version has a temp. 60days license included.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Marcus Schack
Trusted Contributor

Re: Update Eva firmware

Torsten is correct. The software comes with a 60 license, which will expire and you will need to purchase a Command View license before the trial license expires. Once you have received your CV license, you add it into the license file in Command View and it will carry on.
Xachik
Occasional Advisor

Re: Update Eva firmware

Thanks for response.
I have license on CV to unlimited TB already installed on my EVA
For Update Firmware i must purchase new license?
Or the licence on TB is not connected with the licence CV
Torsten.
Acclaimed Contributor
Solution

Re: Update Eva firmware

Same license is used if updating from CV 8.0 to 9.2, no changes needed. Just uninstall the old version, reboot and install the new.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Xachik
Occasional Advisor

Re: Update Eva firmware

Thanks
and other question
Where is saved licence on management module or on disks
Uwe Zessin
Honored Contributor

Re: Update Eva firmware

On some of the disks (which carry the meta-data) of the EVA.
.
Xachik
Occasional Advisor

Re: Update Eva firmware

Thanks Uwe Zessin
and other question
When i uninitialize system
and initialize i must install my old licence
again