EVA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

hp2000 G3 new raid 6 setup

t21drl
Occasional Contributor

hp2000 G3 new raid 6 setup

Recently started a new raid configuration to raid 6 from 5 and now i cannot see the raid via disk management on our server. on the SAN all lights are green. Looking at device manager i also cannot see that the SAN in connected even though the cables have not been moved from when it was working before.  Any ideas what i should be checked,i assume something on the SAN but cant think what.

1 REPLY
Highlighted
Torsten.
Acclaimed Contributor

Re: hp2000 G3 new raid 6 setup

If you create a new vdisk with new volumes, you need to map them again to the servers, Did you do this?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!