Former HPE Products
cancel
Showing results for 
Search instead for 
Did you mean: 

Upgraded from v9 to v10.01 and it's not working with the tape library very well

 
Jeremy C
Regular Advisor

Upgraded from v9 to v10.01 and it's not working with the tape library very well

Upgraded from DP v.9.09 to v10.01.  Tape library is MSL 8096 with four LTO-4 FC drives.

I have two media agent servers that I also upgraded to v10.01.  Each one talks to its own MSL 8096.  They are both behaving in the same exact way.

DP will work with one and only one of the 4 FC drives.  No matter which drive you try to use, it will say that it's starting device path discovery process and it determines the SCSI path to be "Tape0:0:0:0C".  Mind you, no matter which drive you try to use, DP determines it to be that same SCSI path.  So one job can work but anything trying to use another drive at the same time will determine it to be the very same SCSI path and find the device busy by the other job.

Thansk for help.  

1 REPLY 1
Dennis Handly
Acclaimed Contributor

Re: Upgraded from MF DP v9 to v10.01 and it's not working with the tape library very well

This is the wrong company for MF software questions. You need to register in the MF Software Forum:
https://community.softwaregrp.com/t5/Data-Protector-Practitioners/bd-p/itrc-251