New Forum Locations by ITRC Tree

[BGroot]

Hi,

If you click on your screen name you will see your profile information. To make any changes, click on

User Settings -> User Preferences ( this is the "My Community 'area).. This will take you to the area where you can set your preferences.

You also will see the "My Community" area on the home page of the community or in any other category level.

Hope this helps.

[Dennis Handly]

You can also look at the "User Settings" menu and select either Profile (same as your name) or User Preferences.

[isend]

I am new here and was trying to search for solutions for the "HP Fan Error 0051". Then I found the following discussion:
https://community.hpe.com/t5/operating-system-microsoft/hp-vectra-vl400-pc-power-supply-fan-error/m-p/3709356

which mentioned the following links, possibly containing very important information for me:

1. http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=980214

2. http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=986050

But the links are obsolete.  Then I found the ITRC tree here, but still cannot map the two links to this big tree. Can anyone offer more clues for me to find the original contents of these two links? Thank you.

[Parvez_Admin]

Hi @isend ,

If your issue is related to HP vectra pc, then i would recommend you to post your issue in HP Support Forums: https://h30434.www3.hp.com/ or Please visit www.hp.com.

[isend]

Hi @Parvez_Admin ,

I already did: https://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/New-ATX-PSU-does-not-work-for-VL400/td-p/7664722
but I need an answer with more details. Those two old posts in ITRC seem to be my best hope. (P.S. HP engineers refuse to offer assistance on an obselete model.)

[Andrew_Yang]

Hi,

What steps do I need to take to get access to the HP-UX patches? 

Thanks,

Andrew Yang