11.31 on paRISC

[Ivan Doroshuk]

Hello all,

Is there someone who have hpux 11iv3 on a rp3440 with the latest quality pack ( sept 09 ) ? If yes, do you have problem with it ?

In my case I have 3 rp3440 with 11iv3 on them. I had kernel panic on all of them. And yes I have a open call with HP. no solution yet. a lot of vmtrace running. a lot of crash dump uploaded to them... I'm sure they will find a solution. but I'm just curious about the 11iv3-pa-risc mix.

[Steven E. Protter]

Shalom,

Yes I've done this.

The most likely problem here is the system firmware is not up to date.

These systems can run the latest and greatest HP-Ux 11.31. They are certified with apprpopriate firmware installed.

SEP

[BUPA IS]

Hello,
I have one too and so far it appears to be working fine with the sep 09 bundles and at the PDC 46.34 level. You need PDC 45.44 as a minimum level to run v 3.

http://h71028.www7.hp.com/enterprise/us/en/os/hpux11i-v3-upgrade-requirements.html

I hope this is of some help
Mike

[Ivan Doroshuk]

for your information here's my firmware on the three systems :

MP FW : E.03.30
BMC FW : 03.52
System FW : 46.34

So i'm up to date.

Now' I,ll wait for HP to find exactly what my problem is. At this time it's some memory corruption at boot time who wait on the system like a timebomb and without notice crash the system.