cancel
Showing results for 
Search instead for 
Did you mean: 

AM60Srvr EMS alert

MKR_1
Frequent Advisor

AM60Srvr EMS alert

I am getting the following alert daily in the syslog
EMS [2741]: ------ EMS Event Notification ------ Value: "MAJORWARNING (3)" for Resource: "/storage/events/disk_arrays/FC60/AM60Srvr" (Threshold: >= " 3") Execute the following command to obtain event details: /opt/resmon/bin/resdata -R 179634181 -r /storage/events/disk_arrays/FC60/AM60Srvr -n 179634179 -a

I tried restarting AM60Srvr even then this message is poping up everyday in syslog.Please see attachment for event details and please help me resolve this
12 REPLIES
Torsten.
Acclaimed Contributor

Re: AM60Srvr EMS alert

Run

# /opt/resmon/bin/resdata -R 179634181 -r /storage/events/disk_arrays/FC60/AM60Srvr -n 179634179 -a

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: AM60Srvr EMS alert

From your log:

Possible Causes Include:
1. The AM60Srvr is not running.
2. The wrong version of the AM60Srvr is running.
3. The correct AM60Srvr is running, but is hung.


Do you have a FC60 array? Any recent changes?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
MKR_1
Frequent Advisor

Re: AM60Srvr EMS alert

I have run and attached the output in my original message.I had restarted AM60Srvr yesterday when it appeared in syslog.But I got the nsg today as well.Moreover the output didnot say about any affected HW path
MKR_1
Frequent Advisor

Re: AM60Srvr EMS alert

yes it is an FC60 array.No recent changes
Torsten.
Acclaimed Contributor

Re: AM60Srvr EMS alert

I would try to restart the diagnostics and check, if the version is current.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
MKR_1
Frequent Advisor

Re: AM60Srvr EMS alert

Please let me know how to restart diagnostics
Torsten.
Acclaimed Contributor

Re: AM60Srvr EMS alert

/sbin/init.d/diagnostic stop
/sbin/init.d/diagnostic start

What diags version do you have (use swlist or cstm)?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
MKR_1
Frequent Advisor

Re: AM60Srvr EMS alert

EMS-Config A.04.00.01 EMS Config
EMS-Core A.04.00.01 EMS Core Product
EMS-KRMonitor A.11.11.04 EMS Kernel Resource Monitor
EMS-MIBMonitor A.04.00.01 EMS MIB Resource Monitor Product
Isee_EmsListener A.11.07.19 ISEE TCP listener for EMS events
Sup-Tool-Mgr B.11.11.13.14 Support Tools Manager for HPUX systems
WBEMServices A.01.05.08 WBEM Services CORE Product
Torsten.
Acclaimed Contributor

Re: AM60Srvr EMS alert

Better would be

# cstm
Running Command File (/usr/sbin/stm/ui/config/.stmrc).

-- Information --
Support Tools Manager


Version A.49.30 <======

...


or

# swlist|grep -i diag

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
MKR_1
Frequent Advisor

Re: AM60Srvr EMS alert

[root]PRD:/> swlist|grep -i diag
OnlineDiag B.11.11.13.14 HPUX 11.11 Support Tools Bundle, Dec 2003
[root]PRD:/> cstm
Running Command File (/usr/sbin/stm/ui/config/.stmrc).

-- Information --
Support Tools Manager


Version A.43.05

Product Number B4708AA

(C) Copyright Hewlett Packard Co. 1995-2002
All Rights Reserved

Use of this program is subject to the licensing restrictions described
in "Help-->On Version". HP shall not be liable for any damages resulting
from misuse or unauthorized use of this program.

Torsten.
Acclaimed Contributor

Re: AM60Srvr EMS alert

Your version is almost 7 years old!

Update:

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6191AAE

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
study unix
Regular Advisor

Re: AM60Srvr EMS alert

as me known, more EMS alerts are misleading message due to the version older, so you may update it!