Anyone could help for finding the display driver? please

[Cheng Luo]

Cheng:

Post the computer model and perhaps there is a newer driver which might help. Otherwise, someone will have to open up the computer and check the connections from the main board to the display.

Roger
Cheng Luo


July 30, 2003 07:41 AM GMT [ N/A: Question Author ]

--------------------------------------------------------------------------------
Dear Jon and Rodger,

Thank you very much!

Actually the blue screen still come after over night, which it used to became normal after 2 hours switch-off before. Now I just have to use external monitor.

My computer modelSystem:

Microsoft windown 2000

HP OmniBook PC XE3 pentium III 750 HZ, hard disk 20GB
x86 Family 6 Model 8 Stepping 6
AT/AT compatible
261,616 KB RAM

Thank you very much!

Cheng

[Cheng Luo]

Actually I can get back to use my notebook monitor as well, of course blue screen may happen again. So I believe it is the display driver problem, which may not proper configured? Any one help to get a newer and right display driver? Thanks! Cheng

[Ron Kinner]

Drivers for your PC can be reached from:

http://productfinder.support.hp.com/tps/ProductFinder?h_lang=en&h_tool=software&h_query=xe3

You will need to know the exact model number.

Ron

[Cheng Luo]

s3gcxk04.exe

I follow my product number and my Window 2000, get this driver.

I intalled it, it is very fast, no need to boot the computer. Are those right? Cheng