BL10e with Red Hat 3 ES Drive Error

[Don_89]

I'm running ES 3.0 on a BL10e blade and getting a error every 10-15 seconds on the console screen and the message log which is starting to fill up..

kernel: hda: drive_cmd: error=0x04 { DriveStatusError }
kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }

I've already replaced the blade & the HD so i'm 99% sure it isn't the hardware..

I Googled the error and a couple people said it was a bad cable but there is no HD cable on these blades, it plugs directly into the card.. So i tried using 'cable select' and 'master' setting on the hd which had no effect..

any help would be appreciated..

[Saravanan_9]

hi,


try to update the BL10e hdd firmwares and drivers