Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
General
cancel
Showing results for 
Search instead for 
Did you mean: 

BL10e with Red Hat 3 ES Drive Error

Don_89
Trusted Contributor

BL10e with Red Hat 3 ES Drive Error

I'm running ES 3.0 on a BL10e blade and getting a error every 10-15 seconds on the console screen and the message log which is starting to fill up..

kernel: hda: drive_cmd: error=0x04 { DriveStatusError }
kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }

I've already replaced the blade & the HD so i'm 99% sure it isn't the hardware..

I Googled the error and a couple people said it was a bad cable but there is no HD cable on these blades, it plugs directly into the card.. So i tried using 'cable select' and 'master' setting on the hd which had no effect..

any help would be appreciated..
1 REPLY
Saravanan_9
Advisor

Re: BL10e with Red Hat 3 ES Drive Error

hi,


try to update the BL10e hdd firmwares and drivers