BladeSystem Forums Have Moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
General
Showing results for 
Search instead for 
Do you mean 

BL460c iLo 4 Firmware Issue

Occasional Contributor

BL460c iLo 4 Firmware Issue

Hi All,

 

I am having an issue with an iLo firmware update on a BL460c GEN8 / iLo 4.

Currently I have updated 6 of 7 servers from iLo firmware 1.10 to 1.30 but 1 has hung.

 

For the last 2 days this has said '1% Flashing Image...' and will not change.

 

Has anyone else had this issue and how did you resolve.

I can still use the server and browse the iLo but I need this issue resolved.

 

 

Thanks in advance,

1 REPLY
Highlighted
Occasional Contributor

Re: BL460c iLo 4 Firmware Issue

This has now been resloved,

 

Although other blades took this upgrade fine I have approached this box differently.

Firstly I have pulled from the Chassy to reset all power and this stopped the iLo 4 update.

 

To get this updated I went to iLo 4 ver. 1.22 using the scexe from HP.

Then I returned once this was completed and applied the ver. 1.30 update via the iLo 4 interface again.

All went smoothly without any issues.