1748186 Members
4509 Online
108759 Solutions
New Discussion юеВ

Re: Backup issue

 
Sunny123_1
Esteemed Contributor

Re: Backup issue

Hi

Sorry it is DAT tape.


Regards
Sunny
Dennis Handly
Acclaimed Contributor

Re: Backup issue

>This is some one of the file system backup.

Are you saying that the text "BRACKET, MTG-S4A/S4V" comes from some data file you are trying to back up?

By adding "set -x" may give you a clue who is calling awk and with what files.
Sunny123_1
Esteemed Contributor

Re: Backup issue

Hi Dennis

How to use set -x??



I am going at SAM then backup and recovery then automated backup then the error comes.


Regards
Sunny
Sunny123_1
Esteemed Contributor

Re: Backup issue

Hi All

Refer attachment for screen shots of error.

Regards
Sunny
Sunny123_1
Esteemed Contributor

Re: Backup issue

Hi

I have also the error in event.log.Refer attachment

Regards
Sunny
OldSchool
Honored Contributor

Re: Backup issue

while the two attachments don't show anything regarding the error messages you've been talking about, did you notice that that it did report an I/O error on /dev/rmt/0mn

the Event Monitor report was very specific in stating the tape drive has failed.

I'd check cabling and terminators. run Library & Tape Tools or STM/CSTM and test it, or do what it told you and have the drive replaced.

Once you get that fixed, you can worry about backups......but I believe that your other issues will go away once it can actually *perform* the requested backup.
Dennis Handly
Acclaimed Contributor

Re: Backup issue

>How to use set -x?

I'm assume you are still trying to solve your crontab problem with /usr/sam/lbin/br_backup?

Make a copy and add the line "set -x" to the script, near the top.

>I am going at SAM then backup and recovery

Have you given up on br_backup?