Operating System - Microsoft
1748245 Members
3719 Online
108760 Solutions
New Discussion юеВ

Re: Bay locations are not in order when viewing disks with ACU

 
mike worrell
Regular Advisor

Bay locations are not in order when viewing disks with ACU

Hi all,

We just got a brand new PRoliant ML370 G4 in.
Got disks in bays 1-6. When you go into Array Config Util and look at the drives, the bay locations makes no sense what so ever. For instance, Bay 6 shows as Bay 15 and there is no BAY 14. Doesn't make any sense. Any ideas where to look at to fix and get it corrected?

Thanks,
Mike
3 REPLIES 3
Igor Karasik
Honored Contributor

Re: Bay locations are not in order when viewing disks with ACU

Mike,
Just to clarify: where you see bay number ?
do you mean SCSI ID ?
I attached picture from ACU on my ML370 G4 - I don't see any bay numbers.

Which SmartArray controller you have?
Do you have last SmartArray firmware and last Proliant support pack ?
mike worrell
Regular Advisor

Re: Bay locations are not in order when viewing disks with ACU

It's under configuration view.. show physical view.
I have attached a picture. This is a brandnew server from HP right out of the box received 2 weeks ago.
Thanks,
Mike
Igor Karasik
Honored Contributor

Re: Bay locations are not in order when viewing disks with ACU

Mike,
Ok, I understand now - you have SAS SmartArray controller P600. I don't have any experience with SAS.
I suggest you to ask this question on Proliant servers forum:http://forums1.itrc.hp.com/service/forums/categoryhome.do?categoryId=264


>>This is a brandnew server from HP right out of the box received 2 weeks ago.
Anyway, make sure you have last server BIOS and P600 firmware
http://h18000.www1.hp.com/support/files/server/us/download/24653.html
http://h18000.www1.hp.com/support/files/server/us/download/24606.html