Daily i'm receiving an EMS alert about the powersupply. But the powersupply status says normal.
MP:CM> ps
PS
System Power state: On
Temperature : Normal
Power supplies State
-----------------------------------------------------------
Power Supply 0 Normal
Power Supply 1 Normal
Fans State
-----------------------------------------------------------
Fan 0 (System) Normal
Fan 1 (System) Normal
Fan 2 (Pwr) Normal
My Current CSTM Version C.58.00.
Alert -> Dec 10 09:13:40 uxcbp27 EMS [12229]: ------ EMS Event Notification ------ Value: "CRITICAL (5)" for Resource: "/system/events/ia64_corehw/core_hw" (Threshold: >= " 3") Execute the following command to obtain event details: /opt/resmon/bin/resdata -R 801439746 -r /system/events/ia64_corehw/core_hw -n 801439853 -a
$ /opt/resmon/bin/resdata -R 801439746 -r /system/events/ia64_corehw/core_hw -n 801439853 -a
CURRENT MONITOR DATA:
Event Time..........: Wed Dec 10 09:13:40 2008
Severity............: CRITICAL
Monitor.............: ia64_corehw
Event #.............: 104011
System..............: uxcbp27.ipcbpr.com
Summary:
Power Unit : Redundancy lost or not present.
Description of Error:
The number of Power supplies has gone from N+1 (redundant) to N
(non-redundant) if a Power supply was removed, or the number of Power
supplies is < N+1.
Probable Cause / Recommended Action:
The minimum number of power supplies required to power the unit is
currently installed and operating. There are no redundant I/O power
supplies available in case of failure. If redundancy is desired another
Power supply should be added.
For information on the sensor that generated this event, refer to FRU ID
in Event Details section.
Additional Event Data:
System IP Address...: 10.57.18.147
Event Id............: 0x493feab400000000
Monitor Version.....: B.01.00
Event Class.........: System
Client Configuration File...........:
/var/stm/config/tools/monitor/default_ia64_corehw.clcfg
Client Configuration File Version...: A.01.00
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
None
Additional System Data:
System Model Number.............: ia64 hp server rx4640
EMS Version.....................: A.04.20
STM Version.....................: C.58.00
System Serial Number............: USE4737466
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/ia64_corehw.htm#104011v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v
Event Details :
Event Date .............: Fri Jun 13 08:15:40 2008
Sensor Number ..........: 0xcf
Sensor Type ............: Power Unit
Sensor Class ...........: Sensor specific
Sensor Reading/Offset...: 0x02 (Sensor Reading)
Event Type.............: Not Applicable
Entity ID ..............: 21
Generic Message.........:
Power Unit : Power cycle
Entity FRU Id Info......:
power management / power distribution board (Sensor ID: Power Converter)
Kindly suggest me, how i can ignore this EMS alert report.
