HPE Community
BladeSystem - General
1753787 Members
7561 Online
108799 Solutions
New Discussion юеВ

Re: C7000 OA SNMP SysName is wrong

 
jowillia
Frequent Advisor

тАО02-18-2016 07:57 AM

тАО02-18-2016 07:57 AM

C7000 OA SNMP SysName is wrong

Hi,

On about half of our OAs the configured SNMP system Name is not the name that is retrieved when polled.

The polled name is like OA-<mac address>

In the SNMP config under enclosure settings the SNMP system name is something like DC1-BLD1-OA1

I have tried bouncing SNMPd , changing OA and enclosure names and back again etc. Nothing works.

 

0 Kudos
Reply
2 REPLIES 2
jowillia
Frequent Advisor

тАО02-18-2016 08:01 AM

тАО02-18-2016 08:01 AM

Re: C7000 OA SNMP SysName is wrong

firmware version is 3.60

0 Kudos
Reply
jowillia
Frequent Advisor

тАО02-18-2016 11:45 PM

тАО02-18-2016 11:45 PM

Re: C7000 OA SNMP SysName is wrong

..and we also see the same issue with firmware version 4.11

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.