CPU and virtual memory/physical memory upgrade

[hemant dubey_1]

Hi Guys,

I am using B.11.11 U 9000/800 HP-UX server.
I need to find out ..
1. currently there are 4 cpus so Could i add more cpu if yes then how many.

2.how much virtual memory i ca n upgrade?

3.how much virtual memory i can n upgrade?

please help

[Torsten.]

You can upgrade until all supported CPU and memory slots are full.

You need to tell more details about the server.

Run
# model
and
# echo "selclass qualifier memory;info;wait;infolog" | /usr/sbin/cstm

and post the results.

[hemant dubey_1]

root@hdc002:>model
9000/800/L3000-7x

root@hdc002:>echo "selclass qualifier memory;info;wait;infolog" | /usr/sbin/cstm
Running Command File (/usr/sbin/stm/ui/config/.stmrc).

-- Information --
Support Tools Manager


Version A.43.25

Product Number B4708AA

(C) Copyright Hewlett Packard Co. 1995-2002
All Rights Reserved

Use of this program is subject to the licensing restrictions described
in "Help-->On Version". HP shall not be liable for any damages resulting
from misuse or unauthorized use of this program.

cstm>selclass qualifier memory;info;wait;infolog
-- Updating Map --
Updating Map...
-- Converting a (68) byte raw log file to text. --
Preparing the Information Tool Log for MEMORY on path 192 File ...

.... hdc002.hoc.lattice-group.com : 10.141.2.74 ....

-- Information Tool Log for MEMORY on path 192 --

Log creation time: Mon Feb 25 07:00:59 2008

Hardware path: 192


-- Information Tool Log for MEMORY on path 192 --
View - To View the file.
Print - To Print the file.
SaveAs - To Save the file.
Enter Done, Help, Print, SaveAs, or View: [Done] #.
root@hdc002:>

[Torsten. · Accepted solution]

The L3000 (aka rp5470) can have up to 4 CPUs - you have the maximum already installed.

The log output regarding the memory is not useful. Your diagnostics version is very old (2003), you should update and run again.

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6191AAE

[Patrick Wallek]

As this is an L3000 with 4 cpus already, NO you cannot add any more CPUs. 4 is the maximum on this model server.

[hemant dubey_1]

is there any solution other then upgrading the stm now so that i can find out how much physical and virtual memory i can upgrade

[Torsten.]

Your version is old and unsupported, so you should consider to do the upgrade.

You can try to run the command again and select "view" in the menu.