Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
cancel
Showing results for 
Search instead for 
Did you mean: 

Can't connect FC LUNs to BL260

Pabs2000_1
Occasional Contributor

Can't connect FC LUNs to BL260

Hello,

I'm trying to connect a CentOS 5.3 to a FC LUN with a BL260 that has a QLogic card. All is inside of an c7000 with their corresponding SAN switches. (By the way I already have BL460 connected to the SAN in the same chasis, the only difference is that they are running Citrix XenServer)

Whenever I mapp a LUN to the BL260, the QLogic driver recognizes it, because I use the SANSurfer tool and it shows me the LUN.

When I do the command fdisk -l, it doesn't show anything. When i reboot the system, it hangs up because it tries to read the LUN (that i suppose is not formated)

What else can I do????



Thanks!!!