Can't open display in hp-ux 11.31

[user-1221]

Hi,

On newly installed HP-UX server, cannot set the display for x windows, 

enabled X11 Forwarding in the sshd_config

-----------------------------------------

# more /opt/ssh/etc/ssh_config
# $OpenBSD: ssh_config,v 1.21 2005/12/06 22:38:27 reyk Exp $

# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.

# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.

# Site-wide defaults for some commonly used options. For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.

# Host *
# ForwardAgent no
ForwardX11 yes
# RhostsRSAAuthentication no
# RSAAuthentication yes
# PasswordAuthentication yes
# HostbasedAuthentication no
# BatchMode no
# CheckHostIP yes
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# GSSAPIAuthentication no
# GSSAPIDelegateCredentials no
Port 22
Protocol 2
HashKnownHosts yes
HPNDisabled yes
# Cipher 3des
# Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
# EscapeChar ~
Tunnel yes
# TunnelDevice any:any
# PermitLocalCommand no

-------------------------------------

# more /opt/ssh/etc/sshd_config
# $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $

# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin:/opt/ssh/bin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options change a
# default value.

Port 22
Protocol 2
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::

# HostKey for protocol version 1
#HostKey /opt/ssh/etc/ssh_host_key
# HostKeys for protocol version 2
#HostKey /opt/ssh/etc/ssh_host_rsa_key
#HostKey /opt/ssh/etc/ssh_host_dsa_key

# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 768

# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO

# Authentication:

#LoginGraceTime 2m
#PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#CountKeyAuthBadLogins no

# Auth selection

#HostbasedAuthAllowUsers
#HostbasedAuthDenyUsers
#PubkeyAuthAllowUsers
#PubkeyAuthDenyUsers
#KerberosAuthAllowUsers
#KerberosAuthDenyUsers
#KerberosOrLocalPasswdAllowUsers
#KerberosOrLocalPasswdDenyUsers
#PasswordAuthAllowUsers
#PasswordAuthDenyUsers
#ChallRespAuthAllowUsers [pam] user1 user2 ...
#ChallRespAuthDenyUsers [pam] user1 user2 ...
#ChallRespAuthAllowUsers [bsdauth] user1 user2 ...
#ChallRespAuthDenyUsers [bsdauth] user1 user2 ...
#ChallRespAuthAllowUsers [skey] user1 user2 ...
#ChallRespAuthDenyUsers [skey] user1 user2 ...
#ChallRespAuthAllowUsers [securid] user1 user2 ...
#ChallRespAuthDenyUsers [securid] user1 user2 ...
#GSSAPIAuthAllowUsers
#GSSAPIAuthDenyUsers

#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile .ssh/authorized_keys

# For this to work you will also need host keys in /opt/ssh/etc/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no

# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes

# Kerberos options
KerberosAuthentication yes
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no

# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes

# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication mechanism.
# Depending on your PAM configuration, this may bypass the setting of
# PasswordAuthentication, PermitEmptyPasswords, and
# "PermitRootLogin without-password". If you just want the PAM account and
# session checks to run without PAM authentication, then enable this but set
# ChallengeResponseAuthentication=no
UsePAM yes

AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding yes
X11DisplayOffset 10
X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#EnforceSecureTTY no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no
#ChrootDirectory none

# no default banner path
#Banner none

#The following are HPN related configuration options
#tcp receive buffer polling. enable in autotuning kernels
#TcpRcvBufPoll no

# allow the use of the none cipher
#NoneEnabled no

# disable hpn performance boosts.
HPNDisabled yes

# buffer size for hpn to non-hn connections
#HPNBufferSize 2048

# override default of no subsystems
Subsystem sftp /opt/ssh/libexec/sftp-server

# sftp-server umask control
#SftpUmask

#SftpPermitChmod yes
#SftpPermitChown yes

# the following are HPN related configuration options
# tcp receive buffer polling. enable in autotuning kernels
#TcpRcvBufPoll no

# allow the use of the none cipher
#NoneEnabled no

# disable hpn performance boosts.
#HPNDisabled no

# buffer size for hpn to non-hn connections
#HPNBufferSize 2048

# Example of overriding settings on a per-user basis
#Match User anoncvs
X11Forwarding yes
#AllowTcpForwarding yes
# ForceCommand cvs server

-----------------------------------------------

# /sbin/init.d/secsh stop
HP-UX Secure Shell stopped

# /sbin/init.d/secsh start
HP-UX Secure Shell started

XManager is installed on my machine, I can open xwindows on other servers but not this one.

Also, enabled X11 forwarding on Putty, set my Machine IP as the display address along with "MIT-Magic-Cookie-1"

Trying to start xStart session;

# /usr/bin/X11/xterm -ls -display $DISPLAY
/usr/bin/X11/xterm Xt error: Can't open display: %s

# xhost +
xhost: unable to open display "localhost:10.0"

# echo $DISPLAY
localhost:10.0

# xclock
Error: Can't open display: localhost:10.0
Error: Couldn't find per display information

Any help will be highly appreciated,

Thanks in Advance.

[user-1221]

Installed latest SSH 05.90.011, it fixed the issue.