Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Showing results for 
Search instead for 
Did you mean: 

Cannot be contacted with Gicap nodes

Go to solution
Carme Torca
Super Advisor

Cannot be contacted with Gicap nodes

I have one problem. I cannot be contacted on the gicap's server with the configured nodes:


# icapmanage -s -v
Software version:          B.08.01
Serial number:             DEH46420J2
36 GiCAP Sharing Rights: 28 in use, 8 available

Group ID: JUST
Group Members:
        rx7640-13 (cannot be contacted)
        rx7640-02 (cannot be contacted)
          hpit10, hpit16
        rx7640-03 (cannot be contacted)
          hpit07, hpit13
        rx7640-04 (cannot be contacted)
          hpit08, hpit14
        rx7640-06 (cannot be contacted)
          hpit06, hpit12
        rx7640-05 (cannot be contacted)
          hpit05, hpit11
        rx7640-01 (cannot be contacted)
          hpit09, hpit15


And I all the nodes, the message its:


# icapstatus
Software version:          B.08.01
System ID:                 hpit11
Serial number:             DEH4627BA8
Product number:            AB312A
Unique ID:                 7c8dd776-26f7-11db-a9c8-7ac6588ef67a
System contact e-mail:     Not set
From e-mail:               Set to the default ('adm')
Asset reporting:           on
Temporary capacity warning period:  15 days
Exception status:          Negative temporary capacity balance

ERROR:   Unable to obtain GiCAP information.
ERROR:   Unable to execute command:
         /opt/wbem/bin/wbemexec -t 600000

Permission denied (publickey,password,keyboard-interactive).

Local nPartition Status


What is the problem? How the gicap server comunicates withs theirs servers?


Thanks a lot of!


Users are not too bad ;-)
Carme Torca
Super Advisor

Re: Cannot be contacted with Gicap nodes

Finally was the firewall. It had stopped the ssh comunication between the servers!


Users are not too bad ;-)