Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
General
cancel
Showing results for 
Search instead for 
Did you mean: 

Compaq TC1000 X11 tablet driver: LEDs support

vencik
Occasional Contributor

Compaq TC1000 X11 tablet driver: LEDs support

Hello,

I'm a Linux user.
Recently, I've written a working TC1000 X11 tablet driver (see
http://www.razdva.cz/vencik/TC1000_And_Linux/
for whole my TC1000 & Linux project).
Everything works just fine except one little thing; I haven't ever used M$ Windows on my TC1000, but AFAIK the side-buttons can glow when activated.

I'd like to add the side-buttons LEDs support to my driver, but I don't know how the LEDs are accessed.

Can anyone provide or direct me to a tech. info on this subject? Anything will help.

Thanks,

Regards,

vencik
1 REPLY
Don Vanco - Linux Ninja
Regular Advisor

Re: Compaq TC1000 X11 tablet driver: LEDs support

Vencik -
Can't help you specifically, but most current (for the last couple years) HP/Compaq laptops have similar "software driven" buttons. Perhaps if you can find any reference to similar buttons you can find the hooks in the driver you need to duplicate.

That being said - I am guessing that this may require some pretty deep knowledge into the hardware - basically you're going to have to find a pin you need to drive high or low when the button state changes.

I really hate software based buttons regardless of the OS. The fact that I can't silence my laptop til it's fully booted is really stupid. This is one thing that IBM does way better than HP....

Good luck!
DV