General
cancel
Showing results for 
Search instead for 
Did you mean: 

Configure SNMP Trap event for HP EMS events in SCOM

Don Mallory
Trusted Contributor

Configure SNMP Trap event for HP EMS events in SCOM

Hi there,

I'm trying to configure SNMP trap monitoring for HP EMS events in SCOM.

My HP-UX host is running 11.11 and snmpd.conf is configured to send the traps to the SCOM host with a custom community string. It does have all the correct values and the SCOM host is able to communicate (snmpwalk) with the HP-UX host.

EMS is configured to send all monitors, Info and above to SNMP. I can see the traps passing with WireShark on the wire.

How do I configure SCOM to receive the trap? I have the EMS MIB file, but I can't import MIBs into SCOM.

Thanks,
Don
2 REPLIES
Larry Klasmier
Honored Contributor

Re: Configure SNMP Trap event for HP EMS events in SCOM

this seems to be a SCOM issue not an HP-UX issue, shouldn't you be asking this question on MS SCOM forum of some kind?
Don Mallory
Trusted Contributor

Re: Configure SNMP Trap event for HP EMS events in SCOM

I don't disagree, however, the MS SCOM style forums see SNMP coming from HP-UX as a scary thing that lives in some alien world.

I'm hoping that somoene may have had an experience integrating the EMS MIB or at least an OID into a usable event on the SCOM side.