Console hangs through MP after exiting SAM on rx4640

[Waelkhalil_1]

Hi All

i faced a problem on a rx4640 server , the console hangs after making changes in the get way through the sam in the MP LAN ,and never become active , i must power off and then on the server ...attached is the screen shoot of an error appears when i apply the changes in the sam...

[Avinash20]

This is a known issue

Please apply the latest SAM patch

[Avinash20]

You could download the patch

Patch id: PHCO_38185

http://www11.itrc.hp.com/service/patch/patchDetail.do?patchid=PHCO_38185&sel={hpux:11.23,}&BC=main|search|

[Waelkhalil_1]

this patch for the console hang or the error appears...

did u face this strange hang of console before..?

[Avinash20 · Accepted solution]

Yup.. I had a similar issue while configuring APA and adding route I get the same error message and my console hangs..
latest SAM patch resolved the issue

At this point you could also use "Ctrl+X" if OS is 11.11. But on 11.23 for me "Ctrl+X" didnt work

[Waelkhalil_1]

Thanks Avinash

The patch works fine with me...

[Avinash20]

welcome