cancel
Showing results for 
Search instead for 
Did you mean: 

Crash in rx2620

SOLVED
Go to solution
Jacqueline Feria
Occasional Contributor

Crash in rx2620

I get the following error in syslog:

Dec 3 14:07:53 mad06g03 vmunix: System Console is on the Built-In Serial Interface

Dec 3 14:07:53 mad06g03 vmunix: MCA[0]:REVISION:0002

Dec 3 14:07:53 mad06g03 vmunix: MCA[0]:SEVERITY:0

Dec 3 14:07:53 mad06g03 vmunix: MCA[0]:Processor Error Device Info decode begins.

Dec 3 14:07:53 mad06g03 vmunix: MCA[0]:VALIDATION_BITS = 0x000000000100100f

Dec 3 14:07:53 mad06g03 vmunix: MCA[0]:PSP = 0x20000000fff21120

Dec 3 14:07:53 mad06g03 vmunix: MCA/CMC[0]: bus check. info:0x1080000000000340

Dec 3 14:07:53 mad06g03 vmunix: MCA/CMC[0]: req:N/A res:N/A

Dec 3 14:07:53 mad06g03 vmunix: MCA/CMC[0]: tgt:0x00000040727f8b44 ip:N/A

Dec 3 14:07:53 mad06g03 vmunix: MCA[0]:PSI_STATIC_STRUCT.VALID_FIELD_BITS=0x000000000000003f

Dec 3 14:07:53 mad06g03 vmunix: MCA[0]:Processor Error Device Info decode ends.


Also the following files generated under tombstones:

cpumap and
mca20101203125919.000

Can you helpme to investigate what happend in the server.

Regards.
2 REPLIES
cnb
Honored Contributor
Solution

Re: Crash in rx2620

Hi,

The system experienced a Machine Check and the log files will need to be analyzed by HP.



Rgds,
Ismail Azad
Esteemed Contributor

Re: Crash in rx2620

Hi,

I guess your server is an integrity server. If you have an 11.31 operating system, recheck values (next time) of pci_error_tolerance_time and pci_eh_enable as faulty values can cause such problems at times. A high priority machine check/ machine check abort can be related to the process of PCI - bus recovery. And as the king said, send the logs to HP.

Regards
Ismail Azad
Read, read and read... Then read again until you read "between the lines".....