Operating System - Linux
1748233 Members
3472 Online
108759 Solutions
New Discussion юеВ

DL380 Smart Array 6400 Controller + Debian

 
Daniel Ettle
New Member

DL380 Smart Array 6400 Controller + Debian

hello,

I have just purchased 4 DL380 Servers with 2x72GB and 4x18GB HDD Drivers.
The problem I have is that the SmartArray Controller for the 2x72GB works well but the extra bought Smart Array Controller 6400, which is for the 4x18GB Drives, doesn't work.

I have already read
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=551132
but this doesn't solve the problem.

Tried with kernel versions 2.4.27 and 2.6.7.
2 REPLIES 2
Steven E. Protter
Exalted Contributor

Re: DL380 Smart Array 6400 Controller + Debian

The DL380 and other HP/Compaq servers have a special boot disk for setting up smart arrays. Prior to installing Linux you must boot off this cd, and set up the array. Then you can do the Linux installation.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Daniel Ettle
New Member

Re: DL380 Smart Array 6400 Controller + Debian

well, it wasn't a software problem.
The controller itself was broken, on the other 3 Servers it works well.

Thanks anyway.