1748184 Members
3690 Online
108759 Solutions
New Discussion

DTC - Printer Issue

 
Michael T. Harding
Occasional Advisor

DTC - Printer Issue

I have an RX DTC which is the otherside of a firewall. There are a number of terminals setup which work fine connected on port 23 (when I do netstat -an). However I have problem with printer ports, they seem to connect not to the 23 port instead it is a random port above 1000. This is then bounced at the firewall as it only lets port 23 through. Is it possible to force the connection to be made on a certain port? Or any ideas? Hope this makes sense?