Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
Showing results for 
Search instead for 
Did you mean: 

Disk Identify

Juan de Los Palotes
Frequent Advisor

Disk Identify

Hi Guys

How can I identify which are internal disk and san disk on redhat linux?

Thanks a Lot for your help
Honored Contributor

Re: Disk Identify

either you can check with command "fdsik -l" or "cat /proc/partitions"

if the disk is directly connected, then the device name in /proc/partitions file has an entry like

it will be more clear if you give your scenario.
a warrior never quits
Court Campbell
Honored Contributor

Re: Disk Identify

I would go with

# cat /proc/scsi/scsi

You could probably figure it out from the output.
"The difference between me and you? I will read the man page." and "Respect the hat." and "You could just do a search on ITRC, you don't need to start a thread on a topic that's been answered 100 times already." Oh, and "What. no points???"
David Claypool
Honored Contributor

Re: Disk Identify

If it's a ProLiant and the ProLiant Support Pack is loaded, you can tell the disk to flash to identify itself from the System Management Homepage.