HPE Community
Operating System - Linux
1753972 Members
7804 Online
108811 Solutions
New Discussion юеВ

Re: Enabling Raid (HP Embedded Sata RAID) for HP DL 140G3

 
ADas_1
Occasional Advisor

тАО04-08-2007 04:27 PM

тАО04-08-2007 04:27 PM

Enabling Raid (HP Embedded Sata RAID) for HP DL 140G3

Hi,

I am trying to install RHEL4U4 64bit after enabling Raid at BIOS. My custom mondo/mindi image works with Raid disabled. but with RAID enabled it fails giving kernel panic. It is because the disk is not being found. Has anyone configured this scenario, if yes, which drivers/modules were used. the HP provided driver do not work.

Please help

Thanks
Abhijit
0 Kudos
2 REPLIES 2
ADas_1
Occasional Advisor

тАО04-08-2007 08:54 PM

тАО04-08-2007 08:54 PM

Re: Enabling Raid (HP Embedded Sata RAID) for HP DL 140G3

It was missing mpt* drivers. after RAID, mptsas and mptfc comes into play. I added them to my mondo/mindi initrd and it works now.
0 Kudos
ADas_1
Occasional Advisor

тАО04-08-2007 08:55 PM

тАО04-08-2007 08:55 PM

Re: Enabling Raid (HP Embedded Sata RAID) for HP DL 140G3

closing
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.