Operating System - HP-UX
1748169 Members
3803 Online
108758 Solutions
New Discussion

Error log:CIM_ERR_INVALID_CLASS,help!

 
Hu Songyun
Advisor

Error log:CIM_ERR_INVALID_CLASS,help!

Error log:CIM_ERR_INVALID_CLASS,help!

hp-UX reports an error massage every 30 minutes in a Partition in Superdome,

more //var/adm/syslog/syslog.log|grep low-level,then see some messages followed:

root@sbprodap:/>more /var/adm/syslog/syslog.log|grep low-level

Dec 16 03:45:30 sbprodap syslog: icodd: ERROR: The following low-level error occurred:ERROR: The following low-level WBEM error occurred: CIM_ERR_INVALID_CLASS: The specified class does not exist: "HP_NParDynamicProfile"

Dec 16 04:15:30 sbprodap syslog: icodd: ERROR: The following low-level error occurred:ERROR: The following low-level WBEM error occurred: CIM_ERR_INVALID_CLASS: The specified class does not exist: "HP_NParDynamicProfile"

Dec 16 04:45:30 sbprodap syslog: icodd: ERROR: The following low-level error occurred:ERROR: The following low-level WBEM error occurred: CIM_ERR_INVALID_CLASS: The specified class does not exist: "HP_NParDynamicProfile"

Dec 16 05:15:30 sbprodap syslog: icodd: ERROR: The following low-level error occurred:ERROR: The following low-level WBEM error occurred: CIM_ERR_INVALID_CLASS: The specified class does not exist: "HP_NParDynamicProfile"

Dec 16 05:45:30 sbprodap syslog: icodd: ERROR: The following low-level error occurred:ERROR: The following low-level WBEM error occurred: CIM_ERR_INVALID_CLASS: The specified class does not exist: "HP_NParDynamicProfile"

Dec 16 06:15:30 sbprodap syslog: icodd: ERROR: The following low-level error occurred:ERROR: The following low-level WBEM error occurred: CIM_ERR_INVALID_CLASS: The specified class does not exist: "HP_NParDynamicProfile"

Dec 16 06:45:30 sbprodap syslog: icodd: ERROR: The following low-level error occurred:ERROR: The following low-level WBEM error occurred: CIM_ERR_INVALID_CLASS: The specified class does not exist: "HP_NParDynamicProfile"

Dec 16 07:15:31 sbprodap syslog: icodd: ERROR: The following low-level error occurred:ERROR: The following low-level WBEM error occurred: CIM_ERR_INVALID_CLASS: The specified class does not exist: "HP_NParDynamicProfile"

Dec 16 07:45:30 sbprodap syslog: icodd: ERROR: The following low-level error occurred:ERROR: The following low-level WBEM error occurred: CIM_ERR_INVALID_CLASS: The specified class does not exist: "HP_NParDynamicProfile"

Dec 16 08:15:30 sbprodap syslog: icodd: ERROR: The following low-level error occurred:ERROR: The following low-level WBEM error occurred: CIM_ERR_INVALID_CLASS: The specified class does not exist: "HP_NParDynamicProfile"

Dec 16 08:45:30 sbprodap syslog: icodd: ERROR: The following low-level error occurred:ERROR: The following low-level WBEM error occurred: CIM_ERR_INVALID_CLASS: The specified class does not exist: "HP_NParDynamicProfile"

what is the meaning of?   what could i do?

Give me a help ! thank you~~

You may be disappointed if you fail,but you are doomed if you don't try.
1 REPLY 1
Matti_Kurkela
Honored Contributor

Re: Error log:CIM_ERR_INVALID_CLASS,help!

The icodd is requesting NP_NParDynamicProfile information from the cimserver (= the WBEM information server on HP-UX), but the cimserver does not have that information. Icodd is logging the errors because it is not getting the information it wants.

 

Find the version number of your iCAP (Instant Capacity) software using the "swlist" command. Then find the documentation for that version at:

http://www.hp.com/go/virtualization-manuals

 

Find the installation pre-requisites of your iCAP version and check that all of them are satisfied: my first guess is that your current iCAP version requires a cimserver patch or some other WBEM update, and that patch or update is not installed on your system.

 

You posted this to the NonStop server section of the forums, which has nothing to do with HP-UX. I'll ask the moderators to move this thread to the HP-UX section.

MK