General
cancel
Showing results for 
Search instead for 
Did you mean: 

Fedora Core 5 + Proliant DL 320 G4

alexandre mazovetski
Occasional Visitor

Fedora Core 5 + Proliant DL 320 G4

Is an installation of FC5 on Proliant DL 320 G4 possible? After installation there is a problem of the starting of FC5 with error messages
/var/log/messages:

usb 5-2: new full speed USB device using uhci_hcd and address 81
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 7 ports detected
usb 5-1: USB disconnect, address 80
usb 5-1: new full speed USB device using uhci_hcd and address 82
input: HP Virtual Keyboard as /class/input/input4993
input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
usb 5-2: USB disconnect, address 81
Help me pls

7 REPLIES
sandeep_raman
Honored Contributor

Re: Fedora Core 5 + Proliant DL 320 G4

Hello alexandre,

Check USB setting in BIOS.
Any USB device connected?

SRH
alexandre mazovetski
Occasional Visitor

Re: Fedora Core 5 + Proliant DL 320 G4

Yep, I switched USB and 2iLO off -> same problems
david-williams
Occasional Visitor

Re: Fedora Core 5 + Proliant DL 320 G4

check your BIOS for USB Legacy support
alexandre mazovetski
Occasional Visitor

Re: Fedora Core 5 + Proliant DL 320 G4

I already checked BIOS for USB legacy support. OFF or ON are same problems...
david-williams
Occasional Visitor

Re: Fedora Core 5 + Proliant DL 320 G4

can you pass this to your kernel ?
probe/usb=false noapic nolapic


alexandre mazovetski
Occasional Visitor

Re: Fedora Core 5 + Proliant DL 320 G4

Explain pls how I can do it:

probe/usb=false noapic nolapic

thx for your help
david-williams
Occasional Visitor

Re: Fedora Core 5 + Proliant DL 320 G4

Hi

I am not a big fan of redhat based distro's but every distro has an option to pass info to kernel at boot, when you install Fedora i think it's F4 or F5