General
cancel
Showing results for 
Search instead for 
Did you mean: 

Getting errors on the linux enterprise 2.1 installed on compaq DL380 connected to EVA3000

Ketan Gautam Sharma
Occasional Visitor

Getting errors on the linux enterprise 2.1 installed on compaq DL380 connected to EVA3000

Below attached are error messages received from a compaq DL380 servers,which have the linux enterprise 2.1 installed on them and are connected to the EVA 3000.
1 REPLY
SAKET_5
Honored Contributor

Re: Getting errors on the linux enterprise 2.1 installed on compaq DL380 connected to EVA3000

Hi Ketan,

Could you provide more information on your SAN topology. From the error messages, it seems that your device has been configured for an FC-AL (Fibre Channel Arbitrated Loop configuration) and hence multiple LIPs (Loop Initialisation Primitives)..it also finds one of your EVA 3000s as one of the loop nodes.

I wonder if this is indeed your SAN setup, i.e. are you not using point-to-point or switched fabric topology?

lets get more info on the plate and we can take it further...

cheers.