HP 2405 A6255A reporting firmware issue

[Inde]

Hello,

We have started getting the following email alerts for a 2405 disk enclosure, dual pathed.

Enclosure at hardware path 1/10/0/0.8.0.255.0.15.0 : Hardware failure
The enclosure services controller cards have different versions of
firmware. Update the controllers to the same version of firmware.

Enclosure at hardware path 0/4/0/0.8.0.255.0.15.0 : Hardware failure
The enclosure services controller cards have different versions of
firmware. Update the controllers to the same version of firmware.

However, when we run an infolog in cstm the reported versions are the same;


Product ID: A6255A

Controller B
------------
FC Loop ID: 255 (decimal)
Enclosure ID: 1
Hardware Path: 1/10/0/0.8.0.255.0.15.0
Serial No: S52PK1412294
WW Name (node): 50 06 0B 00 00 28 60 A5
WW Name (port): 50 06 0B 00 00 2B 37 E7
Firmware Rev.: HP05


Product ID: A6255A

Controller A
------------
FC Loop ID: 255 (decimal)
Enclosure ID: 0
Hardware Path: 0/4/0/0.8.0.255.0.15.0
Serial No: S521K1412049
WW Name (node): 50 06 0B 00 00 28 60 A5
WW Name (port): 50 06 0B 00 00 2B 36 F2
Firmware Rev.: HP05

Has anyone seen this issue before? We also get email alerts about temp sensors on a FC10 but again when we run an infolog in cstm and it reports no errors.

We are running version A.44.00 of STM.

[Torsten.]

Version A.44.00 is march 2004!

A bit obsolete.

Download and install a current version.

[Torsten.]

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6191AAE

[Inde]

Hi Torsten,

Would the latest version of STM run on
HP-UX B.11.00? The way I read it only A.44.00 would run.

Thanks for your help.

[Torsten.]

The page says there are versions for 11.00, 11.11 and 11.23 - have a look.

[Inde]

It appears A.44.00 is the latest version of STM for HP UX.