Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 9000 / J210 boot problem

Rich Becherer
Occasional Visitor

HP 9000 / J210 boot problem

I need some help. I've inherited an HP 9000 / J210 Workstation with no documentation. During the boot process, the LCD displays the following
1) INIT 3000
2.) INIT 3002
3.) FLT 10BC
Selftest CPU

I saw an online reference which pointed to the "J Class Service Handbook" for explanations on Fault codes, but I can't seem to find that document online. Any assistance is greatly appreciated.
5 REPLIES
Paula J Frazer-Campbell
Honored Contributor
Paula J Frazer-Campbell
Honored Contributor

Re: HP 9000 / J210 boot problem

Hi
Also try here:-

http://docs.hp.com/hpux/hw/index.html

Paula
If you can spell SysAdmin then you is one - anon
Rich Becherer
Occasional Visitor

Re: HP 9000 / J210 boot problem

Paula,

Thanks. I found further references to LCD FLT errors in the two references you pointed out, but they tend to focus on memory errors. If I could find a copy of the Service Manual for this model, I think I'd be in luck. Thanks again.
Darrel Louis
Honored Contributor

Re: HP 9000 / J210 boot problem

Hi,

I think you need to focus on your CPU.

If you're technical, try to remove the CPU.
Put the CPU back and boot.
If you have two CPU's try to boot from one.
Put the other CPU back and check.
Darrel Louis
Honored Contributor

Re: HP 9000 / J210 boot problem

FLT 10bc means: Bad CPU Clock Speed

Good Luck