cancel
Showing results for 
Search instead for 
Did you mean: 

HP D1187A Monitor

Ivan Stretten
Occasional Contributor

HP D1187A Monitor

I have a D1187A monitor connected to an Elite2/True fx video accelorator with a 3Dlabs Glint 500 tx + Glint Delta chip. The monitor is capable of 1280x1024. I can only get a reasonable display when I set the parametes in NT 4 workstation to 1152X870, 32768 colours 75Hz. set on 1280X1024 I get a tripple display, set at 1152X870 the image does not fill the screen, how can I expand this, do I use the contols in the panel on the l/h side, if so how do I do it, ort can I get it to work correctly on 1280X1024
1 REPLY
Alexander M. Ermes
Honored Contributor

Re: HP D1187A Monitor

Hi there.
Are you sure, taht you installed the correct drivers for your vga interface ?
Check your hardware settings pls.
Rgds
Alexander M. Ermes
.. and all these memories are going to vanish like tears in the rain! final words from Rutger Hauer in "Blade Runner"