HP Proliant ML310 install problems w/USB

[jgoeritz]

I installed FC4 without any problems; however I notice that when It boots up the HDDs go crazy when the syslog service starts up. I did an interactive start up and did not start the service and it booted ok. When I check the /var/log/messages it shows a bunch of USB error messages.

localhost kernel :hub 5-2:1.0: USB Hub found
7 ports detected
USB Disconnect, address 88
hal.hotplug[26344] DEVPATH is not set (subsystem input)

And similar messaes all related to USB.

Any help would be GREATLY appreicated

[Steven E. Protter]

Shalom,

Most likely cause here is not preparing the ML310 disk prior to install.

Most HP servers require you to boot of a support cd and set up disk prior to attempting install.

SEP