BladeSystem Forums have moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
General
Showing results for 
Search instead for 
Do you mean 

HP RT3000 G2 UPS - Shutdown timing problems

Highlighted
Occasional Contributor

HP RT3000 G2 UPS - Shutdown timing problems

Hello everyone,

 

after some searching in the the forums and finding some entries similar to my problem but no solutions I'm posting this as a new topic.

 

We're deploying some newly ordered RT3000 G2 ups and are in the middle of configuring them. They're equipped with Network Management Cards and have been loaded for about a week before the tests. The "Shutdown Parameters" settings on the NMC are:

 

- UPS: ...if remaining backup time under 120s

- LS1: after 99999s / battery capacity under 10%

- LS2: after 99999s / battery capacity under 10%

- OS shutdown time 120s

 

Now, if I pull the cable the UPS shuts down way before that- according to the NMC logs at 25% battery capacity and 19mn remaining runtime. The load remains constantly at 9%.

 

Are there any other settings I might be missing? Or am I expecting the wrong results? I'd be thankful for any pointers.

 

Stefan