HP-UX

[aneesh_1]

Dear All,

I wanted to disable one processor in one of the live integrity rx6600 server running with HP_UX 11iV3 from OS.Can anyone tell me how to do it?
Regards
Aneesh

[Jayakrishnan G Naik]

Hi Aneesh

You have to do it from EFI shell. you need to bring the system down.

Shell> help configuration
Configuration commands:

cpuconfig -- Deconfigure or reconfigure cpus

Shell> cpuconfig [cpu] [on|off]


Thanks & Regards
Jayakrishnan G Naik

[P Arumugavel]

Hi,

Follow the way JGN has shown.

Find more info on below:
http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=447681&prodTypeId=15351&objectID=c00273667

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01868394/c01868394.pdf

Rgds...

[Bhadresh]

Hi Aneesh,

It is possible if you have iCOD (instant Capacity on Demand) software. Otherwise use cpuconfig command as suggested by others.

Regards,
Bhadresh

[aneesh_1]

Thank you for your response

Regds
Aneesh

[Bhadresh]

>>>Thank you for your response

Refer the following link which says how you can thank the forum -
http://forums13.itrc.hp.com/service/forums/helptips.do?#28

Regards,
Bhadresh

[Jayakrishnan G Naik]

Hi Aneesh.

Encourage useful replies with appropriate points

Thanks & Regards
Jayakrishnan G Naik