cancel
Showing results for 
Search instead for 
Did you mean: 

HP-UX

aneesh_1
Occasional Contributor

HP-UX

Dear All,

I wanted to disable one processor in one of the live integrity rx6600 server running with HP_UX 11iV3 from OS.Can anyone tell me how to do it?
Regards
Aneesh
6 REPLIES
Jayakrishnan G Naik
Trusted Contributor

Re: HP-UX

Hi Aneesh

You have to do it from EFI shell. you need to bring the system down.

Shell> help configuration
Configuration commands:

cpuconfig -- Deconfigure or reconfigure cpus

Shell> cpuconfig [cpu] [on|off]


Thanks & Regards
Jayakrishnan G Naik
Bhadresh
Trusted Contributor

Re: HP-UX

Hi Aneesh,

It is possible if you have iCOD (instant Capacity on Demand) software. Otherwise use cpuconfig command as suggested by others.

Regards,
Bhadresh

aneesh_1
Occasional Contributor

Re: HP-UX

Thank you for your response

Regds
Aneesh
Bhadresh
Trusted Contributor

Re: HP-UX

>>>Thank you for your response

Refer the following link which says how you can thank the forum -
http://forums13.itrc.hp.com/service/forums/helptips.do?#28

Regards,
Bhadresh

Jayakrishnan G Naik
Trusted Contributor

Re: HP-UX

Hi Aneesh.

Encourage useful replies with appropriate points

Thanks & Regards
Jayakrishnan G Naik