cancel
Showing results for 
Search instead for 
Did you mean: 

HP Vectra VE NT Boot Problem

Ron Ballew
Occasional Visitor

HP Vectra VE NT Boot Problem

Help. I just received an HP Vectra VE PC from our Information Management
Division (IMD). I can't get them to fix this problem so I can't use it.

On boot up I get this error message:
"At least one service or driver failed during system startup.
Use Even Viewer to examine the event log for details."

In the Event Log is an error from Service Control Manager:
"The 3Com 3C59x BUS Master Adapter Driver service failed to start due to the
following error:
A device attached to the System is not functioning."

After Boot UP Internet Explorer errors out witht the following message:
"An application error has occured and an application eror log is being
generated." ... access violation ... IEXPLORE.EXE"

What do I need to do to make this NT PC work?

Any information would be appreciated.

Ronald W. Ballew
Supply Systems Analyst
Logistics Division
USAMEDDAC, Fort Sill, OK
580-458-2130
Ron.Ballew@cen.amedd.army.mil
ron@ballew.org
1 REPLY
Richard Ding
Occasional Visitor

Re: HP Vectra VE NT Boot Problem

I would remove the 3com driver and reinstall it.

Do the IE as well.