General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP350 with 10.20 Need ARPA Transport cummulative patch

SOLVED
Go to solution
Timothy Salus
Occasional Visitor

HP350 with 10.20 Need ARPA Transport cummulative patch

I have an HP 350 with 10.20 on it. I need to set the ip_check_subnet_addr to 0 but I need to load the Arpa patch first so the nettune command will support this parm.

Where do I get it for the HP350 ?

Please help
4 REPLIES
Patrick Wallek
Honored Contributor
Solution

Re: HP350 with 10.20 Need ARPA Transport cummulative patch

A 350 with 10.20? I didin't think they supported 10.20.

Anyway, here's the link for the ARPA cumulative for a 700 series on 10.20:
ftp://ftp.itrc.hp.com/hp-ux_patches/s700/10.X/PHNE_22506

Here's the ARPA cumulative for HP 300/400 series machines on HP-UX 9.x, which is as high as HPs patch archive goes for the 300/400 series:
ftp://ftp.itrc.hp.com/hp-ux_patches/s300_400/9.X/PHNE_3613

To get to the ftp patch server go to:

ftp://ftp.itrc.hp.com/hp-ux_patches/
Timothy Salus
Occasional Visitor

Re: HP350 with 10.20 Need ARPA Transport cummulative patch

I found out the machine is a 9000/826 -- They named the machine HP350 nd I was also told it was a 350 but when I got looking around I found it to be a 9000/826

This should mean I need the patch for the 800 series.

From looking this is a different patch then the 700 and a different name Any Idea. Also I do not work with HP much so how do I do a patch add on HP

Thanks
Patrick Wallek
Honored Contributor

Re: HP350 with 10.20 Need ARPA Transport cummulative patch

OK, that makes a bit more sense then. The latest ARPA cumulative patch is PHNE_22507 and it is available at:
ftp://ftp.itrc.hp.com/hp-ux_patches/s800/10.X

The text file for the patch is: ftp://ftp.itrc.hp.com/hp-ux_patches/s800/10.X/PHNE_22507.txt and it includes installation instructions at the end of the document.

The patch itself is: ftp://ftp.itrc.hp.com/hp-ux_patches/s800/10.X/PHNE_22507
You will need to download this, perferably directly to your HP machine. Once it is on your machine you will need to do:
# sh PHNE_22507
This will create a PHNE_22507.depot and a PHNE_22507.txt file on your machine. The PHNE_22507.depot is the one that will be installed. Just follow the directions at the end of the .txt file and you will be OK.

By the way, you MUST be logged in as the root user to install the patch.
Timothy Salus
Occasional Visitor

Re: HP350 with 10.20 Need ARPA Transport cummulative patch

I go the patch install and all is working fine now thanks