General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP9000 window terminal in block mode

 
SOLVED
Go to solution
Stf
Esteemed Contributor

Re: HP9000 window terminal in block mode

Hello,

To calrify what I need :

In fact I don't have anymore a HP3000 server, my HP3000 application were migrated on a HP9000 server, that's why I need to turn on block mode on a HP9000 window terminal.

Rgds

Stf
Jose Mosquera
Honored Contributor

Re: HP9000 window terminal in block mode

Hi,

You need a MS-Windows (R) emulator's software that support block-mode terminal configuration for your native HP3000's application recently migrated to a HP9000 environment. This allow that MS-Windows (R) users can work from PCs against your aplication running in HP9000. If this is your scenario please attend to the comments Rick, Donna and Bill.

Please excuse me the emphasis that I have done in the word "windows", I think it may be open to misinterpretation. :)

Rgds.
Bill Hassell
Honored Contributor

Re: HP9000 window terminal in block mode

Downlod QCTerm from http://www.aics-research.com/qcterm/


Bill Hassell, sysadmin
Highlighted
Stan Sieler
Respected Contributor
Solution

Re: HP9000 window terminal in block mode

Hi Stf,

So...a couple of things...

1. What is trying to use block mode?

This really boils down to *how* was your application migrated from the 3000?

The reason I ask is that most 3000 applications that used blockmode did it via the VIEW library, which was never moved by HP to the 9000 :(

Thus, users who did in-house migration are extremely unlikely to have left their applications still using VIEW.

Some vendors have VIEW-compatible HP-UX subsystems that they sell ... are you using one of these?

2. Wait ... aren't there any other users at your site?

How did *they* solve this problem? I.e., if you didn't do the migration yourself, *somebody* did, and they know the answer to your question :)

3. Environment

There are a number of ways you could end up using block mode on HP-UX:

- login to your HP-UX system via an X-Windows method
(e.g., CDE, or something similar)

Then, use HP's "hpterm" instead of "xtem" or "dterm".
"hpterm" is the world's *worst* HP emulator ... no, I take that back, it's the world's second-worst HP terminal emulator (the one that runs in a web page is the worst :)
but....it does support block mode (I used to use it
every day via a 9000 workstation ... I used it with vt3k to connect to an HP 3000.

Note: I'm not sure if HP still ships hpterm with HP-UX.
On our system it's found in /usr/contrib/bin/X11/hpterm

- login via telnet, using a third-party HP terminal emulator

-- QCTerm is free, and works very well. It runs on Windows and uses either telner or a serial connection.

-- Attachmate (formerly Walker, Richer and Quinn)'s Reflection for HP 3000 is a commercial product that works extremely well. I use it everyday, including some block mode use.

Hope that helps,
Stan