Operating System - HP-UX
1753952 Members
7761 Online
108811 Solutions
New Discussion юеВ

Re: HPPM 4.0 Installation

 
SOLVED
Go to solution
George Sander
New Member

HPPM 4.0 Installation

Does HPPM 4.0 installed on hpux ver 11i v2 require a reboot?
6 REPLIES 6
smatador
Honored Contributor
Solution

Re: HPPM 4.0 Installation

Hi,
I do not think, the -r is just for windows and silent mode
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c00210166/c00210166.pdf
Torsten.
Acclaimed Contributor

Re: HPPM 4.0 Installation

No reboot needed, but there was a version 4.2 already in 2007. Check the web page.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
George Sander
New Member

Re: HPPM 4.0 Installation

Thanks for the input.
George Sander
New Member

Re: HPPM 4.0 Installation

What about required patches? This is 11i v1 not v2 as previously stated.
Emil Velez
Honored Contributor

Re: HPPM 4.0 Installation

There is a version 7 of this product. HP Performance Manager..

It installs without a reboot.
Torsten.
Acclaimed Contributor

Re: HPPM 4.0 Installation

I think it is the power manager ;-)

http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/software/power-manager/pm3-dl.html#b427

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!