HW Path

[Eslam Kamal]

I have a server K420 and I upgrade it to k460

the OS 10.20

After installing 10/100 BASE-TX network card on 10/16/16 HW path , driver and requaired patches I got the driver loaded on the kernel but I cannot get the card by ioscan can any one help

[Jeff Schussele]

Ho Eslam,

Are you sure of that path?
I don't even see the Core I/O for 10/16.
I'd try another slot if you have one open.

Rgds,
Jeff

[harry d brown jr]

Eslam,

The attached jpeg shows the backplane of a K 4x0 box, where do you have the card plugged into, and are the lights on?

live free or die
harry

[Eslam Kamal]

Hi
find the location of the card by Black on the attached file

[Helen French · Accepted solution]

Hi Eslam:

The HP-PB Expansion can be done only after changing the PAL ( programmable array logic) on the main system board. If you have not yet done this, then perform this with HP hardware support personnel, that will solve your issue.

Read this I/O upgrade manual for HP K class systems:

http://docs.hp.com/hpux/pdf/A2375-90027.pdf

HTH,
Shiju