General
cancel
Showing results for 
Search instead for 
Did you mean: 

Health & Wellness drivers for ML370

Sean Crosby_1
Occasional Advisor

Health & Wellness drivers for ML370

i am trying to install Red Hat 9.0 on a ML370 and i want to monitor the server.
The fan is at high speed and i want to slow it down. When I had Win2k on the server it was handled by the compaq tools that were loaded.
How can I do this with Linux?
Thanks
8 REPLIES
Ivajlo Yanakiev
Respected Contributor

Re: Health & Wellness drivers for ML370

Hi

Fans auto switch their speed.
If you have normal env they will slow down.

I'm not sure about linux driver, but you can try HPUX site with word SIM and Insite Manager.
Also try this link
http://h18023.www1.hp.com/support/files/server/us/family/model/1119.html?locale=en_US&prodSeriesId=254940
Sean Crosby_1
Occasional Advisor

Re: Health & Wellness drivers for ML370

I am trying to run Red Hat 9.0 on this server. I think I read somewhere that RH 9.0 is not supported on the server.
Do you know if that is correct?
I know that when I had Win2k on this server I was able to load up the Compq/HP Rompaq and it slowed the fan down.
Thanks
HGN
Honored Contributor

Re: Health & Wellness drivers for ML370

Hi

The link below has the details for fan speed issue

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=689429

Rgds

HGN
Sean Crosby_1
Occasional Advisor

Re: Health & Wellness drivers for ML370

Thanks. I will check it out.
Do you think it will work on RH 9.0? If not I will have to drop it back to 8.0.
Ivajlo Yanakiev
Respected Contributor

Re: Health & Wellness drivers for ML370

Red Hat Ready Certified hardware from Hewlett Packard

ML370 support REDHAT version
7
8
AS 2.1
AS 3.0


Ivajlo Yanakiev
Respected Contributor

Re: Health & Wellness drivers for ML370

I think that it will be work.
My be you will need to do some change in install script. Find where scrpt check RH version and comment it or add your version :)))
Sean Crosby_1
Occasional Advisor

Re: Health & Wellness drivers for ML370

After I run the RPM what should be done next?
The package was installed successfully but the fan is still loud.
Do I just need to reboot the server?
Sean Crosby_1
Occasional Advisor

Re: Health & Wellness drivers for ML370

I think I answered my own issue. I just started the service and now I am good.
Thanks for everyones help.