General
cancel
Showing results for 
Search instead for 
Did you mean: 

How to Configure ESL712e Exchanger with HP-UX

SOLVED
Go to solution
Sial_1
Frequent Advisor

How to Configure ESL712e Exchanger with HP-UX

Hi,

could someone help me that how to configure ESL 712e Tape Library Exchanger with HP-UX 11.23?
unknown -1 0/3/2/0/4/0.2.10.255.0.0.2 UNCLAIMED UNKNOWN HP ESL E-Series

i have already configured the all Ultrium Drives (jsut enabling the Stape Driver through SAM).

for referance Ioscan output is attached.

Thanks in advance
2 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: How to Configure ESL712e Exchanger with HP-UX

This is the picker (robot) device, you need to add the "schgr" kernel driver.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Sial_1
Frequent Advisor

Re: How to Configure ESL712e Exchanger with HP-UX

yes it worked, enabling the "schgr" kernel driver solve my problem.

Thanks a lot for your help.