How to configure DTC pritner using SAM

[Carles Viaplana]

Hello,

Anybody knows how should I configure a DTC printer using SAM?

OS: HP-UX 11.00
script command: ocd -nstcrl -f/dev/pscrl01 -p2001 -c/etc/ddfa/pcf_b

Thanks in advance,

Carles

[Adisuria Wangsadinata_1 · Accepted solution]

Hi,

Check the url below (docID : KBAN00000833) about 'Configuring a Printer on a DTC using HP DTC Manager/UX (not 16RX)' :

http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000073698458

and this url below (docID : KBAN00001066) about 'Configuring a Printer on a DTC 16RX using HP DTC 16RX Manager' :

http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000073548383

Hope this information can help you.

Cheers,
AW

[Arunvijai_4]

Hi,

Take a look at this doc,
[DTC Device File Access Utilities and Telnet Port Identification > Chapter 5. Application Examples
Setting Up Printers with the HP-UX Spooler]

http://docs.hp.com/en/B1030-90002/ch05s01.html

#

Steps to configure the HP-UX spooler from SAM:

1. After entering SAM, go to the screen for local printer/plotter.
2. Select the option for adding a printer/plotter requiring a nonstandard device file.
3. SAM scans the system hardware and lists all the MUX cards on the system. Select any MUX card and any port on that MUX card. You will later change the MUX device file name to another device file name associated with the DTC or non-DTC server port.
4. Complete the screen for adding a printer as follows:
Printer name:

Assign a name to the printer.
Printer model / interface:


With this field selected, press the Enter key. Select the appropriate printer from the list displayed.
Printer device file name:


Enter the printer device file name that you entered in the file /etc/ddfa/dp for the DTC or other terminal server port. This replaces the MUX device file name that SAM supplied.
5. Complete the other fields as desired.
6. Exit from SAM.

[Muthukumar_5]

Several manuals available in docs.hp.com.

Go to http://docs.hp.com/ and search with your keywords as configure DTC printed with sam

It will manuals.

hth.

[Carles Viaplana]

Docs attached to thread help me completelly.