HPE Community
Operating System - HP-UX
1753925 Members
8666 Online
108810 Solutions
New Discussion

How to configure RS 232-c Full modem pad in MDP Port

 
Balaji_3
Advisor

‎10-29-2002 12:47 AM

‎10-29-2002 12:47 AM

How to configure RS 232-c Full modem pad in MDP Port

Hi,

We are having HP9000/829/K410 Server with HP-UX 10.20 Installed.We are planning to do LOOPBACK Test in these Server.So, we planned to do the test using MDP Port.
We are having one RS232-c full modem pad with 8 Port (0-7).We connected this RS 232 modem pad in the MDP Port and the device file created is /dev/ttyd0p4.
We connected RJ45 jack with CAT5 cable for the LOOPBACK Test, in port number 1 and 4.

Now, any of you can please guide me how to assure the loopback connected is it right method or Any other url to configure MDP port using RS 232 Port or any other document to configure RS 232 Full Model Pad.

If you need any other clarification, Please get back me.


Thanks & Regards
-Balaji
The word IMPOSSIBLE itself says that I'MPOSSIBLE
0 Kudos
Reply
1 REPLY 1
Bill McNAMARA_1
Honored Contributor

‎10-29-2002 12:56 AM

‎10-29-2002 12:56 AM

Re: How to configure RS 232-c Full modem pad in MDP Port

not my area of speciality, but you can I suppose look around at /etc/uucp/Devices
try appending the /dev/tty.. to it.

Later,
bill
It works for me (tm)
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.