- Community Home
- >
- Servers and Operating Systems
- >
- Operating Systems
- >
- Operating System - HP-UX
- >
- Re: How to detect CPU serial Number?
Categories
Company
Local Language
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Discussions
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Community
Resources
Forums
Blogs
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-16-2012 08:59 PM
08-16-2012 08:59 PM
Re: How to detect CPU serial Number?
yes, the " processor serial number = 0x0000000000000000 " just in the output of "machinfo" on 11.23 ITA64,
in 11.31 ITA64, there are no "processor serial number"
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-16-2012 09:52 PM
08-16-2012 09:52 PM
Re: How to detect CPU serial Number?
"cprop" is part of sfm (system fault management) and should always be installed.
The "MAKO" cou above is a HP PA-RISC 8900 CPU - dual core, hence only a single serial number.
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-16-2012 10:20 PM
08-16-2012 10:20 PM
Re: How to detect CPU serial Number?
thanks , got it
I still cann't found the "cprop", would you please give the absolute path for this command ?
there are no cprop in " /opt/propplus/bin/", even in my machine, there are no "propplus"
moreover, can you indicate me how to get the CPU serial numbers in ITA64 platform?
it seems whatever "machinfo" or "cstm" cann't return the CPU information.
thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-16-2012 10:44 PM
08-16-2012 10:44 PM
Re: How to detect CPU serial Number?
https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=DiagProdCollection
What is the server model?
Please post complete
# echo "sel dev all;info;wait;il" | cstm
for the 11.23 server.
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-16-2012 11:02 PM - last edited on 08-21-2012 02:27 AM by Jamie_Liu
08-16-2012 11:02 PM - last edited on 08-21-2012 02:27 AM by Jamie_Liu
Re: How to detect CPU serial Number?
1) my HPUX 11.31 info as below:
# model
ia64 hp server rx2620
# ls /opt/propplus
/opt/propplus not found
2) my HPUX11.23 ITA64 , cstm output:
-- Information Tool Log for system on path system --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: system
Product ID : ia64 hp server rx2620
Current Product Number : AB332A
Original Product Number : N/A
System Firmware Revision : 04.29
BMC Revision : v04.04
System Serial Number: : (for your security, I have removed the serial number from your post above - that's information you probably don't want to make publicly available. Forum Moderator)
System Software ID : 0345837144
For additional information about the system and the CPUs, please run the
following command:
/usr/contrib/bin/machinfo
Field Replaceable Unit Identification (FRUID):
------------------------------------------------------------------------------
ID: 0x05 FRU Name: I/O Backplane
BOARD INFO:
Mfg Date/Time: 0
Manufacturer : hp
Product Name : pci riser card
S/N : (for your security, I have removed the serial number from your post above - that's information you probably don't want to make publicly available. Forum Moderator )
Part Number : A7231-66530
FRU File ID : 10
------------------------------------------------------------------------------
ID: 0x06 FRU Name: MP Board
BOARD INFO:
Mfg Date/Time: 0
Manufacturer : hp
Product Name : management processor card
S/N :(for your security, I have removed the serial number from your post above - that's information you probably don't want to make publicly available. Forum Moderator)
Part Number : A7231-66580
FRU File ID : 10
------------------------------------------------------------------------------
ID: 0x80 FRU Name: DIMM0A
Mfg Part Number:A6969AX-MIICHT0D
Serial Number:(for your security, I have removed the serial number from your post above - that's information you probably don't want to make publicly available. Forum Moderator) ------------------------------------------------------------------------------
ID: 0x81 FRU Name: DIMM0B
Mfg Part Number:A6969AX-MIICHT0D
Serial Number:(for your security, I have removed the serial number from your post above - that's information you probably don't want to make publicly available. Forum Moderator) ------------------------------------------------------------------------------
ID: 0x88 FRU Name: DIMM1A
Mfg Part Number:A6969AX-MIICHT0D
Serial Number:(for your security, I have removed the serial number from your post above - that's information you probably don't want to make publicly available. Forum Moderator) ------------------------------------------------------------------------------
ID: 0x89 FRU Name: DIMM1B
Mfg Part Number:A6969AX-MIICHT0D
Serial Number:(for your security, I have removed the serial number from your post above - that's information you probably don't want to make publicly available. Forum Moderator)
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for IPF_MEMORY on path memory --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: memory
Basic Memory Description
Module Type: MEMORY
Page Size: 4096 Bytes
Total Physical Memory: N/A
Total Configured Memory: 4096 MB
Total Deconfigured Memory: N/A
Memory Board Inventory
DIMM Location Size(MB) DIMM Location Size(MB)
-------------------- -------- -------------------- --------
DIMM 0A 1024 DIMM 0B 1024
DIMM 1A 1024 DIMM 1B 1024
DIMM 2A ---- DIMM 2B ----
DIMM 3A ---- DIMM 3B ----
DIMM 4A ---- DIMM 4B ----
DIMM 5A ---- DIMM 5B ----
Total: 4096 (MB)
===========================================================================
Memory Error Log Summary
The memory error log is empty.
Page Deallocation Table (PDT)
The Page Deallocation Table is empty.
PDT Entries Used: 0
PDT Entries Free: 100
PDT Total Size: 100
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for Bus Adapter on path 0 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0
Product ID: Bus Adapter
Hardware Path: 0
PCI Vendor ID: 0x103c
PCI Device ID: 0x1229
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for PCI Bus Adapter on path 0/0 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/0
Product ID: PCI Bus Adapter
Hardware Path: 0/0
PCI Vendor ID: 0x103c
PCI Device ID: 0x122e
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for IDE Bus Adapter on path 0/0/2/0 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/0/2/0
Product ID: IDE Bus Adapter
Hardware Path: 0/0/2/0
PCI Vendor ID: 0x1095
PCI Device ID: 0x649
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for IDE Interface on path 0/0/2/0.0 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/0/2/0.0
Product ID: IDE Interface
Hardware Path: 0/0/2/0.0
PCI Vendor ID: 0x1095
PCI Device ID: 0x649
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for Optical Storage Device on path 0/0/2/0.0.0.0 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/0/2/0.0.0.0
Product Id: DVD+-RW ND-6650A Vendor: _NEC
Device Type: Optical Storage Device Firmware Rev: 1.81
Device Qualifier: _NECDVD+-RW Logical Unit: 0
Serial Number: N/A
Capacity (M Byte): N/A
Block Size: N/A
Max Block Address: N/A
Error Logs
Read Errors: N/A Buffer Overruns: N/A
Read Reverse Errors: N/A Buffer Underruns: N/A
Write Errors: N/A Non-Medium Errors: N/A
Verify Errors: N/A
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for IDE Interface on path 0/0/2/0.1 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/0/2/0.1
Product ID: IDE Interface
Hardware Path: 0/0/2/0.1
PCI Vendor ID: 0x1095
PCI Device ID: 0x649
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for PCI Bus Adapter on path 0/1 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/1
Product ID: PCI Bus Adapter
Hardware Path: 0/1
PCI Vendor ID: 0x103c
PCI Device ID: 0x122e
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for MPT SCSI Adapter on path 0/1/1/0 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/1/1/0
Device File : /dev/mpt2
Device ID : 0x0030
Vendor ID : 0x1000
PCI Revision ID : 8
Subsystem ID : 0x1324
Subsystem Vendor ID : 0x103c
Firmware Version : 01.03.35.70 IO
Firmware Image Size : 40632 bytes
SCSI Initiator ID : 7
PCI Configuration Space Registers
Status = 0x0230 Command = 0x0157
Class Code = 0x10000 (SCSI Controller)
Cache Line Size = 0x20
Latency Timer = 0x40
Expansion ROM Address = 0x90100000
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for SCSI Disk on path 0/1/1/0.0.0 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/1/1/0.0.0
Product Id: MAW3147NC Vendor: HP 146 G
Device Type: SCSI Disk Firmware Rev: HPC1
Device Qualifier: HP146 Logical Unit: 0
Serial Number: (for your security, I have removed the serial number from your post above - that's information you probably don't want to make publicly available. Forum Moderator) Capacity (M Byte): 140014.41
Block Size: 512
Max Block Address: 286749487
Smart Enabled: TRUE
Error Logs
Read Errors: 0 Buffer Overruns: N/A
Read Reverse Errors: N/A Buffer Underruns: N/A
Write Errors: 0 Non-Medium Errors: 72
Verify Errors: 0
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for SCSI Disk on path 0/1/1/0.1.0 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/1/1/0.1.0
Product Id: MAW3147NC Vendor: HP 146 G
Device Type: SCSI Disk Firmware Rev: HPC1
Device Qualifier: HP146 Logical Unit: 0
Serial Number: A0002380 0542
Capacity (M Byte): 140014.41
Block Size: 512
Max Block Address: 286749487
Smart Enabled: TRUE
Error Logs
Read Errors: 0 Buffer Overruns: N/A
Read Reverse Errors: N/A Buffer Underruns: N/A
Write Errors: 0 Non-Medium Errors: 72
Verify Errors: 0
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for MPT SCSI Adapter on path 0/1/1/1 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/1/1/1
Device File : /dev/mpt3
Device ID : 0x0030
Vendor ID : 0x1000
PCI Revision ID : 8
Subsystem ID : 0x1324
Subsystem Vendor ID : 0x103c
Firmware Version : 01.03.35.70 IO
Firmware Image Size : 40632 bytes
SCSI Initiator ID : 7
PCI Configuration Space Registers
Status = 0x0230 Command = 0x0157
Class Code = 0x10000 (SCSI Controller)
Cache Line Size = 0x20
Latency Timer = 0x40
Expansion ROM Address = 0x90000000
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for SCSI Disk on path 0/1/1/1.2.0 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/1/1/1.2.0
Product Id: MAW3147NC Vendor: HP 146 G
Device Type: SCSI Disk Firmware Rev: HPC1
Device Qualifier: HP146 Logical Unit: 0
Serial Number: (for your security, I have removed the serial number from your post above - that's information you probably don't want to make publicly available. Forum Moderator)
Capacity (M Byte): 140014.41
Block Size: 512
Max Block Address: 286749487
Smart Enabled: TRUE
Error Logs
Read Errors: 0 Buffer Overruns: N/A
Read Reverse Errors: N/A Buffer Underruns: N/A
Write Errors: 0 Non-Medium Errors: 60
Verify Errors: 0
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for PCI 1000Base-T LAN Adapter on path 0/1/2/0 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/1/2/0
Product ID: HP PCI-X 1000Base-T Dual-port Built-in
Device ID: 0x1079
Revision ID: 0x0003
Vendor ID: 0x8086 ( Intel Corporation )
Class Code: 0x020000 (Reserved)
Base Class: 0x0002 ( Network Controller )
Sub-Class/Interface: 0x00/0x00 ( Ethernet )
Device Status: 0x0230
Bit 5: 66 MHz Capable
Bit 9-10: DEVSEL timing 01 - medium
Subsystem Vendor ID: 0x103c
Subsystem ID: 0x12cd
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for PCI 1000Base-T LAN Adapter on path 0/1/2/1 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/1/2/1
Product ID: HP PCI-X 1000Base-T Dual-port Built-in
Device ID: 0x1079
Revision ID: 0x0003
Vendor ID: 0x8086 ( Intel Corporation )
Class Code: 0x020000 (Reserved)
Base Class: 0x0002 ( Network Controller )
Sub-Class/Interface: 0x00/0x00 ( Ethernet )
Device Status: 0x0230
Bit 5: 66 MHz Capable
Bit 9-10: DEVSEL timing 01 - medium
Subsystem Vendor ID: 0x103c
Subsystem ID: 0x12cd
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for PCI Bus Adapter on path 0/2 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/2
Product ID: PCI Bus Adapter
Hardware Path: 0/2
PCI Vendor ID: 0x103c
PCI Device ID: 0x122e
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for PCI Bus Adapter on path 0/3 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/3
Product ID: PCI Bus Adapter
Hardware Path: 0/3
PCI Vendor ID: 0x103c
PCI Device ID: 0x122e
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for PCI Bus Adapter on path 0/4 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/4
Product ID: PCI Bus Adapter
Hardware Path: 0/4
PCI Vendor ID: 0x103c
PCI Device ID: 0x122e
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for PCI Bus Adapter on path 0/5 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/5
Product ID: PCI Bus Adapter
Hardware Path: 0/5
PCI Vendor ID: 0x103c
PCI Device ID: 0x122e
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for PCI Bus Adapter on path 0/6 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/6
Product ID: PCI Bus Adapter
Hardware Path: 0/6
PCI Vendor ID: 0x103c
PCI Device ID: 0x122e
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for RS-232 Interface on path 0/6/1/0 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/6/1/0
Product ID: RS-232 Interface
Hardware Path: 0/6/1/0
PCI Vendor ID: 0x103c
PCI Device ID: 0x1290
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for RS-232 Interface on path 0/6/1/1 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 0/6/1/1
Product ID: RS-232 Interface
Hardware Path: 0/6/1/1
PCI Vendor ID: 0x103c
PCI Device ID: 0x1048
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for Graphics Interface on path 0/6/2/0 --
Log creation time: Fri Aug 17 02:10:08 2012
Hardware path: 0/6/2/0
Model: Not Available
Product Number: Not Available
Use the "graphinfo" command for more information.
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for IPMI Controller on path 250/0 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 250/0
Product ID: IPMI Controller
Hardware Path: 250/0
PCI Vendor ID: 0x4950
PCI Device ID: 0x4930
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for RS-232 Interface on path 250/1 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 250/1
Product ID: RS-232 Interface
Hardware Path: 250/1
PCI Vendor ID: 0x504e
PCI Device ID: 0x5030
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for RS-232 Interface on path 250/2 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 250/2
Product ID: RS-232 Interface
Hardware Path: 250/2
PCI Vendor ID: 0x504e
PCI Device ID: 0x5030
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=
-- Information Tool Log for ACPI Device on path 250/3 --
Log creation time: Fri Aug 17 02:10:07 2012
Hardware path: 250/3
Product ID: ACPI Device
Hardware Path: 250/3
PCI Vendor ID: 0x4143
PCI Device ID: 0x5049
thanks!!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-16-2012 11:21 PM
08-16-2012 11:21 PM
Re: How to detect CPU serial Number?
bash-3.2$ machinfo
CPU info:
Number of CPUs = 2
Clock speed = 1600 MHz
Bus speed = 400 MT/s
CPUID registers
vendor information = "GenuineIntel"
processor serial number = 0x0000000000000000
processor version info = 0x000000001f020204
architecture revision: 0
processor family: 31 Intel(R) Itanium 2 Family Processors
processor model: 2 Intel(R) Itanium 2 processor
These are 2 Itanium 2 (Madison) with up to 9MB L3 Cache single core CPUs.
Obviously you cannot get a serial number, even the MP:CM> df command only lists a "Electronic Signature" - this could be something like a serial number.
Question is - is it really important?
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-16-2012 11:30 PM
08-16-2012 11:30 PM
Re: How to detect CPU serial Number?
yes, I am developing a application that can detect CPU serial number on HP Unix platform,
so, the application is running on the machine, can not connect Mp to check the information
:-(
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-16-2012 11:39 PM
08-16-2012 11:39 PM
Re: How to detect CPU serial Number?
Maybe an updated cstm version or the SFM tools can read them - not sure. This is obviously different on this server model (CPU model) compared to other servers.
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-17-2012 09:48 AM
08-17-2012 09:48 AM
Re: How to detect CPU serial Number?
It sounds like you are looking for a unique system identifier. HP-UX has always provided this with uname -i. This is a unique ID that is stored on the system board for purposes of licensing. All HP-UX systems will have a unique uname -i value.
- « Previous
-
- 1
- 2
- Next »