General
cancel
Showing results for 
Search instead for 
Did you mean: 

How to manage MSA storage from Hp-UX

Pietro84
Advisor

How to manage MSA storage from Hp-UX

Hello,

where can I find documentation about how to manage MSA storage using HP-UX?

 

I need to chech an msa500 connected to 1 server.

 

 

Thanks

4 REPLIES
nayak
Regular Visitor

Re: How to manage MSA storage from Hp-UX

boukari
HPE Pro

Re: How to manage MSA storage from Hp-UX

Hello Friend,

I Now Command view storage device manager :

Command view

 

===

Command View SDM overview

HP StorageWorks Command View Storage Device Manager is a powerful device management tool that reduces system administration overhead and allows the management of greater storage with the same personnel greatly reducing total cost of ownership.

HP Command View SDM acts as a centralized management platform through a common user interface from which the value-added software solutions can be launched. Command View scalability ranges from management of a single array to multiple arrays all from a single management console. Included in Command View SDM is event/trap forwarding capabilities to network management frameworks enabling network administrators to be aware of any changes in their storage environment.

Installing HP StorageWorks Command View SDM software

HP StorageWorks Command View SDM software can be installed on:

  • HP-UX
  • Windows
  • Red Hat Linux
  • ====
  • Regards,
BCS SW/HW GSC Engineer (L1)
IEEE Student Member
LPI 3 CORE & High Availability
VCP Vshpere 5 Datacenter
Novell CLA and Data Center specialist Certified
.....
Microsoft Partner & Microsoft student Partner
Torsten.
Acclaimed Contributor

Re: How to manage MSA storage from Hp-UX

But Command View SDM is the tool to manage the VA7000 array family - not for MSA's.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: How to manage MSA storage from Hp-UX

I don't know about the MSA500, but I know the very similar MSA1000 and MSA1500. These arrays can be managed via a serial connection to the controllers using a CLI, the commandline or GUI based ACU from windows and Linux. But at least in the past there was also a CLI for HP-UX, called HP-UX hpacucli - according to the release notes for MSA1000/1500 only. So your option is the serial line connection.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!