Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
General
cancel
Showing results for 
Search instead for 
Did you mean: 

INFORMIX 731.UC2 - OMNI BACK 3.00

VALERIANO VILLEGAS JUAN
Occasional Visitor

INFORMIX 731.UC2 - OMNI BACK 3.00

I HAVE A PROBLEM WHEN I MAKE RESTORE WITH OMNI-BACK

0:50:19 Physical Restore of rltab5 Completed.
10:50:19 Checkpoint Completed: duration was 0 seconds.
10:50:53 Checkpoint Completed: duration was 0 seconds.
10:50:54 Physical Restore of rltab3 Completed.
10:50:54 Checkpoint Completed: duration was 0 seconds.
10:51:04 Checkpoint Completed: duration was 0 seconds.
10:51:04 Physical Restore of rltab6 Completed.
10:51:04 Checkpoint Completed: duration was 0 seconds.
10:51:04 Logical Recovery Started.
10:51:05 Checkpoint Completed: duration was 0 seconds.
10:51:05 Start Logical Recovery - Start Log 4468, End Log ?
10:51:05 Starting Log Position - 4468 0x5b0e190
11:17:19 DBspace rllog1 not recovered from same archive backup as DBspace rootd
bs.

11:17:19 Cannot change to Quiescent Mode.

COULD SOMEBODY HELP ME ?
infiernix
1 REPLY

Re: INFORMIX 731.UC2 - OMNI BACK 3.00

Is it possible you did a restore of the root DBspace or a DBspace containing the physical log or a logical log file ? If so, you have to physically restore the root DBspace and ALL DBspaces containing a logical or physical log file as well.

As OmniBack does not control the backup (it doesn't decide what to recover), but passes parameters to "onbar", I would suggest using the command (f.e. "onbar -r" for full restore ; check the manuals).

Hope this helps ...